Installing The Fork Legs - MOTO GUZZI stelvio 1200 NTX MY11 Service Manual

Suspensions
•
Screw the upper cap on the pumping
member pin.
•
Place the sleeve in the vice using the
specified tool.
•
Screw the upper cover, tightening it to
the prescribed torque.
Specific tooling
AP8140149 Protection for fitting operations
•
Once the operations are completed,
restore the spring preloading correct
value.

Installing the fork legs

•
Insert the fork stem in position.
•
Insert the wheel pin so that the stems
are aligned.
SUSP - 264
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Stelvio 1200 NTX MY11