MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 251

Stelvio 1200 NTX MY11
20.O-ring
21.Complete sleeve
22.Spring holder cap
23.Spring guide
24.Preloading pipe
25.Spring guide
26.Spring
27.Bushing
28.Dust guard
29.Snap ring
30.Sealing ring
31.Cap
32.Bushing
Adjustment
The front suspension consists of a hydraulic fork
connected to the headstock by means of two
plates.
For adjusting the suspension set up, each stan-
chion has an upper nut (1), for adjusting spring
preloading, and an upper set screw (2):
•
act on the right stem set screw to adjust
hydraulic rebound damping;
•
act on the left stem set screw to adjust
hydraulic compression damping.
ADJUSTMENTS
Regular adjustment (standard):
- rider only.
Medium load setting:
- (for example, rider with passenger or with luggage).
Maximum load adjustment:
- (e.g. rider, passenger and luggage).
Specification
Spring preloading, nut (1) - regular load conditions
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
FORK SETTING
Normal load adjustments are the standard settings by manufacturer:
FORK SETTINGS
Desc./Quantity
tighten (clockwise) 8 turns from fully open
Suspensions
SUSP - 251