MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 227

Stelvio 1200 NTX MY11
•
Place the gear on the oil pump shaft.
•
Place the washer on the oil pump shaft.
•
Tighten the nut to the specified torque.
•
Place the oil pump control gear on the
crankshaft and align its reference with
that marked during the removal phase
on the oil pump driven gear.
•
Tighten the nut to the specified torque.
•
Insert the joint in the oil pump.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 227