MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 219

Stelvio 1200 NTX MY11
Refitting the crankcase halves
In case the lubrication jets are removed, replace
them with two new of the same type. Check that
the O-ring is fitted on the jets.
Do not interchange them upon refitting because
they have a different length.
Lubrication
pos. Description
1 Pump outlet oil pipe nipple
2 Slot screw for oil pipe on the cylinder head
3 Nipple on the radiator and the oil pipe
4 Oil delivery pipe to radiator slot screw
5 Jets fixing screw
6 Minimum oil pressure sensor
7 Intake oil filter fixing screw
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
L S
UBRICATION YSTEM
Type Quantity
M14x1.5 1
M14x1.5 2
M16x1.5 2
M14x1.5 1
- 3 Using a "T" spanner, close
M12 1
- 2
Torque Notes
40 Nm (29.50 lbf ft)
20 Nm (14.75 lbf ft)
20 Nm (14.75 lbf ft) Apply vaseline oil
35 Nm (25.81 lbf ft)
Loctite 243
by hand
25 Nm (18.44 lbf ft)
4 Nm (2.95 lbf ft)
Engine
-
-
-
-
-
ENG - 219