MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 276

Chassis
Checking
•
Check that the universal joint is not
damaged, the gear teeth inserting in
the sleeve grooves and the grooves on
the joint are not deformed or damaged;
otherwise, replace the joint.
•
Check that the rubber bellows are not
cut or pierced; otherwise, replace it.
•
Check that the fork pin threads and the
fork fixing nuts are not damaged, de-
formed or flattened; otherwise, replace
them.
•
Check that the sleeve grooves are not
damaged, deformed or deteriorated;
otherwise, replace the sleeve.
•
Check that the sleeve outer toothing
and grooves are not damaged.
Installing
•
Spread a thin layer of lubricating
grease all along the swingarm pin.
•
Fit the ring nut in the swingarm pin and
screw it manually.
•
Working from both sides, grease the
cardan shaft cables with the recom-
mended product from the recommen-
ded products table.
•
Block the swingarm, insert the univer-
sal joint, align the holes and, at the
same time, helped by a second opera-
tor, insert the pin completely.
•
Tighten the swingarm pin.
CHAS - 276
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Stelvio 1200 NTX MY11