MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 298

Chassis
•
Undo and remove the screw and col-
lect the nut and the washer.
•
Remove the exhaust end.
Removing the manifold - tail pipe
•
Remove the exhaust end and the ex-
haust manifolds.
•
Remove the starter motor protection in
order to disconnect the lambda probe
connector.
•
Unscrew and remove the nut and re-
move the fixing screw.
•
Remove the manifold - exhaust end
coupling together with the lambda
probe.
See also
Removing the
exhaust manifold
CHAS - 298
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Stelvio 1200 NTX MY11