MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 262

Suspensions
•
Insert the retainer ring in its position.
Filling oil
•
Place the sleeve upright in a vice fitted
with protection shoes.
•
Compress the sleeve in the stem.
Place a support under the stem in order
to leave it compressed.
•
Pour part of the fork oil into the sleeve.
•
Wait some minutes until the oil fills all
the ducts.
•
Pour the remaining oil.
•
Pump out oil a few times.
•
Measure the air gap between the oil
level and the rim.
THE SLEEVE MUST BE PERFECTLY UPRIGHT IN ORDER
TO MEASURE THE CORRECT OIL LEVEL. THE OIL LEVEL
MUST BE THE SAME IN BOTH STEMS.
Specific tooling
AP8140149 Protection for fitting operations
Characteristic
Oil level (from sleeve rim, without the spring
and preloading pipe)
110 mm (4.33 in).
Fork oil
650 cm³ (39.66 cu.in) (for each stem)
SUSP - 262
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Stelvio 1200 NTX MY11