MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 157

Stelvio 1200 NTX MY11
•
Remove the circlip, the shoulder wash-
er and remove the gear of the first gear,
collect the ball bearing cage.
•
Remove the bearing if necessary.
See also
Disassembling the gearbox
Checking the primary shaft
Measure coaxiality of the main shaft with a dial
gauge and a centring device and replace it if not
complying with specifications.
Characteristic
Shaft coaxiality limit
0.08 mm (0.0031 in)
Check transmission gears for signs of pitting and wear and replace damaged gears if necessary.
Check the gear fitting teeth for cracks, damage and wear and replace those damaged if necessary.
Check the transmission gears movement and, if it is not regular, replace the damaged part.
Checking the secondary shaft
Measure the coaxiality of the transmission shaft
with a dial gauge and a centring device and re-
place it if not complying with specifications.
Characteristic
Shaft coaxiality limit
0.08 mm (0.0031 in)
Check transmission gears for signs of pitting and wear and replace damaged gears if necessary.
Check the gear fitting teeth for cracks, damage and wear and replace those damaged if necessary.
Check the transmission gears movement and, if it is not regular, replace the damaged part.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 157