MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 323

Stelvio 1200 NTX MY11
•
Remove both pins.
•
Remove the vibration-damping plate.
•
Extract one pad at a time.
CAUTION
AFTER REMOVING THE PADS, DO NOT OPERATE THE
BRAKE LEVER OR THE CALLIPER PLUNGERS COULD
GO OUT OF THEIR SEATS RESULTING IN BRAKE FLUID
LEAKS.
Installing
•
Insert two new pads, placing them so
that the holes are aligned with the cal-
liper holes.
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY
ARE CORRECTLY POSITIONED INSIDE THE CALLIPER.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Braking system
BRAK SYS - 323