MOTO GUZZI stelvio 1200 NTX MY11 Service Manual page 226

Engine
•
Remove the gasket between the
crankcase and the oil pump.
See also
Removing the generator
Installing
•
Place a new gasket between the crank-
case and the oil pump.
•
Place the oil pump.
•
Tighten the three screws fixing the oil
pump.
•
Place the driving pin on the oil pump
shaft.
ENG - 226
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Stelvio 1200 NTX MY11