Installing The Fork Legs - MOTO GUZZI California 1400 Instructions Manual

Suspensions
•
Screw the upper cap on the pumping member pin.
•
Position the stanchion in a vice by
means of the special tool, keeping the
forks in a vertical position.
•
Tighten the cap to the prescribed tor-
que.
Specific tooling
020951Y Stanchion support

Installing the fork legs

•
Insert the stanchion in position. Insert the wheel axle so that the stems are aligned.
•
Tighten the screws on the fork plates
to the prescribed torque.
SUSP - 310
California 1400