Table of Contents
Advertisement
Stelvio 1200 NTX MY11
If there is a larger difference:
•
act on the set screw of the throttle body
connecting rod to reduce the pressure
difference in the two pipes.
•
Repeat the procedure "Throttle posi-
tion self-acquisition" as explained
above.
•
Take the engine back to idle and check
the depression values so that they are
aligned between the two cylinders.
•
Otherwise, open only the screw with
higher depression, using the by-pass
screws, to compensate.
Recovery function
If the signal of the following sensors is interrupted, the control unit determines some values to keep the
engine running or it uses a different parameter. The instrument panel and the Navigator also signal the
problem.
Specification
air temperature
engine temperature
barometric pressure
throttle valve potentiometer
idle motor
Using Navigator for injection system
Injection system
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
RECOVERY FUNCTION
with linear increase from the air temperature at ignition
2.9° at idle, otherwise variable.
fixed value variable depending on the vehicle
Power supply
Desc./Quantity
25 °C (77 °F)
30 °C (86 °F)
1010 hPa
P SUPP - 241
Hide quick links:
Advertisement
Table of Contents
