Stelvio 1200 NTX MY11
•
Use the suitable box-spanner to tight-
en the ring nut.
Specific tooling
05.91.26.30 Tool for tightening the swingarm
pin ring nut - clutch hub
•
Tighten the two screws of the swing-
arm clamp.
•
Fit the dust guard cap in the gearbox.
•
Lock the dust guard cap with a new
clamp.
•
Place the reaction rod into its seat.
•
Insert the screw.
•
Screw the nut fixing the reaction rod.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Chassis
CHAS - 277