Table 9: Ucm6108/Ucm6116 Network Settings->Basic Settings; Table 10: Ucm61Xx Network Settings->802.1X - Grandstream Networks UCM6102 User Manual

LAN 1 / LAN 2 (when Method is set to "Dual")
Default Interface
IP Method
IP Address
Gateway IP
Subnet Mask
DNS Server 1
DNS Server 2
User Name
Password
Preferred DNS Server
IP Method
IP Address
Gateway IP
Subnet Mask
DNS Server 1
DNS Server 2
User Name
Password
802.1X
The UCM61xx provides users 802.1X settings for LAN port and WAN port (UCM6102 only).
802.1X Mode
Firmware Version 1.0.1.22
If "Dual" is selected as "Method", users will need assign the default interface to
be LAN 1 or LAN 2. The default interface is LAN 1.
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Enter the gateway IP address for static IP settings. The default setting is 0.0.0.0.
Enter the subnet mask address for static IP settings. The default setting is
255.255.0.0.
Enter the DNS server 1 address for static IP settings. The default setting is
0.0.0.0.
Enter the DNS server 2 address for static IP settings.
Enter the user name to connect via PPPoE.
Enter the password to connect via PPPoE.
Table 9: UCM6108/UCM6116 Network Settings->Basic Settings
Enter the preferred DNS server address.
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
Enter the IP address for static IP settings.
Enter the gateway IP address for static IP settings.
Enter the subnet mask address for static IP settings.
Enter the DNS server 1 address for static IP settings.
Enter the DNS server 2 address for static IP settings.
Enter the user name to connect via PPPoE.
Enter the password to connect via PPPoE.
Table 10: UCM61xx Network Settings->802.1X
Select 802.1X mode. The default setting is "Disable". The supported 802.1X
mode are:
•
EAP-MD5
•
EAP-TLS
•
EAP-PEAPv0/MSCHAPv2
UCM6102/6104/6108/6116 USER MANUAL Page 29 of 138