Using Functions With Mitel Opencount - Mitel 6863 SIP User Manual

Phoning

Using functions with Mitel OpenCount

Mitel OpenCount is a software package for call logging management
in communication systems and offers a clear overview over all cost
structures. The application can be integrated into your MiVoice
Office 400 communication system and enables the logging, the
administration, and the analysis of all call and connection data.
If a Mitel OpenCount is integrated into your MiVoice Office 400 com-
munication system, the following additional feature is also available
on your phone.
Activating PIN telephony
The PIN telephone service is part of Mitel OpenCount. The possible appli-
cations of the PIN telephony depend on the area of use, for example in the
area of health care and accommodation/hotel:
• Independently from the phone you can make external calls for a fee.
The credit may be limited.
• You can charge the charges and the call information of your outgoing
and incoming calls to specific projects.
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 88).
For further information, please see the product-specific user guides for
Mitel OpenCount on our website (www.mitel.com) or contact your system
administrator.
Activating/deactivating PIN call:
Press the function key for
➔
The function is activated/deactivated. The LED on the function key is
switched on/off (Mitel 6865 SIP only).
70
PIN call / PIN call rebook.
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.2 – R4.0 SP1 – 01.2016