Table of Contents
Advertisement
You will be alerted to the announcement with two short signal tones and
spoken to directly via the loudspeaker.
Continue an announcement as a phone call:
Pick up the handset.
➔
You are on the phone with whoever started the announcement.
Note:
If the announcement was started to the group, all other recipients of the
announcement will be excluded.
Stop announcement:
Press the End key and put down the handset.
Recording a call
You want to record an active call with your call partner.
You may record an active call as soon as your system administrator has
configured at least one of your e-mail addresses in the MiVoice Office 400
communication system. Your call party can be an internal or an external
user. The recordings are made and backed up only as .wave files in your
individual e-mail boxes. You can find a call recording overview in your e-
mail box. Contact your system administrator for more information.
You can start recording calls in the following situations:
• during an active call;
• During a conference call (with maximum two participants)
• During an incoming/outgoing call
• in call preparation;
• During dialling with a busy line.
Call recording only starts when the connection is set up. Therefore, no
ring-back tones or wait tones are recorded.
Call recording is temporarily interrupted during an enquiry and an e-mail is
sent with the recording made up till then. Recording restarts automatically
once the call connection with the enquiry call party is set up and/or once
the call connection with the first correspondent is restored.
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.2 – R4.0 SP1 – 01.2016
Phoning
45
Advertisement
Table of Contents
