Mitel 6863 SIP User Manual page 42

Phoning
Mitel 6865 SIP:
Call transfer with prior notice (you are in a call):
1. Press the forward key.
2. Enter the call number of the second call party and press the
press the corresponding busy lamp field).
➔
3. Wait until the person has answered the call.
➔
4. Announce the call party.
5. Put the handset on-hook.
➔
Call transfer without prior notice (you are in a call):
1. Press the forward key.
2. Enter the call number of the second call party and press the
press the corresponding busy lamp field).
➔
3. Wait for the first ring tone.
4. Put the handset on-hook.
➔
➔
Note: You can change the procedure by first starting an enquiry call before call transfer.
Take (pick up own call)
You want to transfer a call from one phone to another without interrupting
the connection (for example, from a desk phone to a cordless phone).
The take function can be used to transfer calls between your phones.
Requirements: You are using the one number user concept (see chapter
"One number user concept", page 8).
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 88).
Picking up your own call (you are in an active call):
Press the function key for Take.
➔
After a brief moment, you are connected with the caller on another phone.
42
The second call party is called; first call party is put on hold.
If the second user does not answer, you can cancel the second call using
the softkey Cancel
Your first call partner and the other person are now connected with each other.
The second call party is called; first call party is put on hold.
The other party is then called directly by your first call partner.
Recall: If the other party does not answer, the call comes back to your phone.
and recommence the first call by pressing
Dial softkey (or
Pick up.
Dial softkey (or
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.2 – R4.0 SP1 – 01.2016