Table of Contents
Advertisement
Brokering (to switch back and forth between the callers):
You are in an active call and have set up a connect to another call party with the
Enquiry function.
Press the flashing line key.
➔
Your call partner changes. The other call party is put on hold.
Note:
You can also switch between call parties by pressing the corresponding busy
lamp field key to which you have saved the call party.
Terminating a call:
Press the End key.
Recommence conversation with the first call party:
Press the flashing line key.
Making a conference call
You want to make a conference call.
A conference call allows you to connect three call parties. From a confer-
ence call/call, you can initiate an enquiry call to someone else. You can
broker between the conference participants and the enquiry call party.
Depending on the system configuration, a conference call can consist of
up to 6 conference participants. You can hold a conference call with inter-
nal and external users.
Mitel 6863 SIP: You must save this function to a configurable key using
Self Service Portal (see chapter "Configuring or deleting a key assign-
ment", page 88).
Note:
If you have a user account for the Self Service Portal, you can create con-
ference rooms there (see chapter "MiVoice Office 400 Self Service Portal",
page 9).
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.2 – R4.0 SP1 – 01.2016
Phoning
39
Advertisement
Table of Contents
