Table of Contents
Advertisement
Setting the ring:
Press the Option key.
Scroll to
Scroll to
Scroll to
Select the setting you want and confirm with the
➔
After you selected a ring melody, the melody will be played.
Note:
• A list of alarm melodies is available for playback:
dies
• You can configure individual ring tones for each busy lamp field and line
key using the Self Service Portal (only Mitel 6865 SIP). For more infor-
mation about the Self Service Portal, please refer to "MiVoice
Office 400 Self Service Portal", page 9.
Setting the audio properties
Using your phone, you can make and answer calls using the handset,
headset or handsfree system. The audio settings allow the use of different
combinations of these three operation modes in order to achieve maxi-
mum flexibility in phone operation. The following options are available for
selection:
Audio settings
Audio Mode
•
Speaker
(default)
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.2 – R4.0 SP1 – 01.2016
Preferences
and press the navigation key to the right.
Tones
and press the navigation key to the right.
Tones
and press the navigation key to the right.
> Test.
Description
1)
:
Setting possibilities:
The connection is established via the handset or the
hands-free system.
• Press the loudspeaker/headset key when in handset
mode to switch to hands-free mode.
• Pick up the handset when in hands-free mode to
switch to handset mode.
Personalizing your phone
Set
softkey.
Menu
>
Alarm melo-
75
Advertisement
Table of Contents
