Overview
The following features deliver superior four-way performance on the HP ProLiant
DL580 Generation 2 server:
•
Up to four Intel Xeon Processors MP with Hyper-Threading technology
•
400-MHz front-side bus
•
Four-way interleaved PC1600 ECC DDR SDRAM
•
64-bit, 100-MHz, quad-peer PCI-X buses
•
Embedded Wide Ultra3 RAID and storage solutions
•
RJ-45 Autosensing Ethernet NIC with Wake-On Lan (WOL) support and Preboot
eXecution Environment (PXE) support (installed in an expansion slot)
Key redundancy and hot-plug features create a high availability environment:
•
Advanced Memory Protection technology including online spare, single-board
mirrored memory, hot-plug mirrored memory, and Hot-Add memory
functionality
•
Embedded Smart Array 5i Plus Controller with support for 64-MB fully
transportable write cache
•
Redundant hot-plug fans in three zone (CPU, memory, I/O) configuration, each
with N+1 redundancy
•
Redundant hot-plug power supplies
•
PCI-X Hot Plug
•
Redundant ROM
•
Optional redundant NIC
The ProLiant DL580 Generation 2 server offers a highly scalable environment with
the following expansion capabilities:
•
Memory expansion to 32 GB
•
Four SCSI hard drive bays
•
Six PCI-X slots (four hot-plug slots)
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
Server Features
1-3