Locking The Pci-X Retaining Clip Open - HP ProLiant DL580 Setup And Installation Manual

9. If you are installing a full-length board, press the PCI-X retaining clip toward the
center wall to lock it in the open position.
Figure 7-9: Locking the PCI-X retaining clip open
10. Install the expansion board in the slot and apply even pressure to seat the board
securely (1).
11. Flip the expansion slot latch down and lock it into place (2).
Figure 7-10: Installing a PCI-X Hot Plug expansion
board
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
PCI-X Technology
7-15