Pci-X Expansion Slot Leds - HP ProLiant DL580 Setup And Installation Manual

PCI-X Technology
Table 7-5 identifies PCI-X Hot Plug slot activity status according to LED description.
Table 7-5: PCI-X Expansion Slot LEDs
LED State
Power On
Fault Off
Power On
Fault On
Power Flashing
Fault On or off
Power Off
Fault On
Power Off
Fault Off
Note: If the any of the LEDs indicates an error, refer to Appendix H, "Troubleshooting," for
more information.
7-8
OK to Open Slot Status
Power is currently applied to the slot. Do not open the
No
expansion slot latch. The slot is functioning normally.
Power is currently applied to this slot, but the slot needs
attention for a possible problem with the slot, expansion
No
board, or driver. Do not open the expansion slot latch.
The power slot is being turned off or on, which may take
No
several minutes. Do not open the expansion slot latch.
Press the PCI-X Hot Plug button to cancel the operation.
Power to this slot is turned off, but this slot needs attention.
Yes
There may be a problem with the slot, expansion board, or
driver.
The power to the slot is off. An expansion board may be
Yes
installed in this slot.
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide