Trusted Platform Module (Tpm) - China Import Restrictions; Hpe Trusted Platform Module Guidelines; Installing The Trusted Platform Module Overview - HP Enterprise ProLiant MicroServer Gen10 User Manual

Table of Contents

Advertisement

This server supports TPM 2.0. To prevent possible damage to the TPM or to the system board, the TPM cannot be
removed from the board once it has been installed.
Trusted Platform Module (TPM) — China Import Restrictions
HPE Special Reminder: Before enabling TPM functionality on this system, you must ensure that your intended use of
TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable.
For any compliance issues arising from your operation/usage of the TPM which violates the above mentioned
requirement, you shall bear all the liabilities wholly and solely. HPE will not be responsible for any related liabilities.

HPE Trusted Platform Module guidelines

CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines can cause hardware
damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system board.
When installing or replacing hardware, Hewlett Packard Enterprise service providers cannot enable the TPM or the
encryption technology. For security reasons, only the customer can enable these features.
When returning a system board for service replacement, do not remove the TPM from the system board. When
requested, HPE Service provides a TPM with the spare system board.
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security rivet. Upon
locating a broken or disfigured rivet on an installed TPM, administrators should consider the system compromised and
take appropriate measures to ensure the integrity of the system data.
When using BitLocker, always retain the recovery key/password. The recovery key/password is required to enter
Recovery Mode after BitLocker detects a possible compromise of system integrity.
HPE is not liable for blocked data access caused by improper TPM use. For operating instructions, see the encryption
technology feature documentation provided by the operating system.

Installing the Trusted Platform Module overview

Procedure
1. Installing the Trusted Platform Module board.
2. Retain the recovery key/password.
3. Enabling the Trusted Platform Module.
Hardware options installation
58

Advertisement

Table of Contents
loading

Table of Contents