Installing Hardware Options
•
BBWCE
•
Memory boards and DIMMs
•
PCI-X expansion boards that are installed in slots 1 and 2
WARNING: To reduce the risk of personal injury or damage to the equipment,
HP recommends that only trained and qualified personnel install non-hot-plug
components. In particular, personnel should be trained to deal with products
capable of producing hazardous energy levels.
WARNING: To reduce the risk of electric shock or damage to the equipment:
•
•
•
Hot-plug options include:
•
Hot-plug SCSI hard drives
•
Hot-plug fans
•
Redundant hot-plug power supplies
•
Memory board in the hot-plug mirrored memory mode or when Hot-Add
functionality guidelines are met
•
PCI-X Hot Plug expansion boards, slots 3 through 6
5-4
Disconnect power from the server by unplugging all power cords from
either the electrical outlet or the server.
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide