Hot-Plug Scsi Hard Drive Leds; Hot-Plug Scsi Hard Drive Leds - HP ProLiant DL580 Setup And Installation Manual

Hot-Plug SCSI Hard Drive LEDs

The hard drive LEDs, located on each physical drive, are visible on the front of the
server or external storage unit. They provide activity, online, and fault status for each
drive when configured as part of an array and attached to a powered-on controller.
Their behavior may vary depending on the status of other drives in the array. Use
Figure E-2 and Table E-2 to identify the location and status of each of the LEDs.
Figure E-2: Hot-plug SCSI hard drive LEDs
Table E-2: Hot-Plug SCSI Hard Drive LEDs
Item Description
1
Drive activity
2
Online status
3
Fault status
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
Status
On = Drive activity
Off = No drive activity
Flashing = Online activity
Off = No online activity
Flashing = Fault-process activity
Off = No fault-process activity
System LEDs and Switches
E-3