HP ProLiant DL580 Setup And Installation Manual page 248

System LEDs and Switches
Table E-12: BBWCE LEDs
Server Status
Server is on and is in the
first 30 seconds after
power-up
Server is off and is in data
retention mode
CAUTION: After the server is powered down, wait 15 seconds and then check the
illumination pattern of the LEDs before unplugging the cable from the battery module.
•
•
When the server is on, review the POST message before plugging or unplugging the
cable from the battery module.
E-14
continued
LED Color
Amber or
green
Amber
If the amber LED blinks after 15 seconds, do not remove the cable from the
battery module. This module is backing up data, and data will be lost if the cable
is detached.
If neither LED blinks after 15 seconds, it is safe to remove the cable from the
battery module.
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
LED Status Battery Module Status
On Temporary lock-out state, data
was lost due to cable being
detached
Blinking every User data held in write cache is
15 seconds being backed up