Figure 1-13 Closing The Top Cover; Figure 1-14 Front Bezel Retaining Clip - HP Rp3440-4 - 9000 - 0 MB RAM Installation Manual

Installing the System
Installing Additional Components
Step 2. Grasp the blue release lever and slide the cover toward the front of the server until the lever snaps
into place.

Figure 1-13 Closing the Top Cover

Step 3. Slide the server into the rack enclosure and reconnect the power and external cables.
Removing and Replacing the Front Bezel on a Rack-Mounted Server
You must remove the front bezel from the chassis to gain access to the power supplies and optical drive.
Removing the Front Bezel on a Rack-Mounted Server
Step 1. Press in on the retaining clips located on the right-side of the front panel.

Figure 1-14 Front Bezel Retaining Clip

28
Chapter 1