Table of Contents
Advertisement
2.8.3.2 Removing the Feeding Outside Guide
1) Remove the ADF drive unit. (See
2.8.1.2)
2) Disconnect the connector [1], and de-
tach the grounding plate [2].
3) Remove the static eliminator [3] as
much as shown.
4) Remove the 2 screws [4], and detach the
feeding outside guide [5].
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 5 MECHANICAL SYSTEM
[2]
[1]
[3]
F05-208-25
[4]
F05-208-26
[3]
[5]
5-61
Advertisement
Table of Contents
Troubleshooting
