Canon SmartBase PC1200s Service Manual page 89

007 ATT transmission level
Use it to set the transmission level (ATT).
Increase the transmission level if an error occurs often because of the line condition at
time of a communication.
The following error codes are associated with the line condition at time of
transmission:
Memo ##100, ##101, ##102, ##104, ##201, ##280, ##281, ##282, ##283, ##284,
##750, ##752, ##754, ##755, ##757, ##759, ##760, ##762, ##764, ##765,
##767, ##769, ##770, ##772, ##774, ##775, ##777, ##779, ##780, ##782,
##784, ##785, ##787, ##789
The following error codes are associated with the line condition at time of
reception:
##103, ##106, ##107, ##201, ##793
010 pseudo CI signal
Use it to set a frequency for the pseudo CI signal.
At times, certain types of external telephones fail to ring while fax/tel switch-over takes
place. If so, change the frequency of the pseudo CI signal.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 2 USING THE MACHINE
2-45