When Relocating The Machine - Canon SmartBase PC1200s Service Manual

CHAPTER 3 INSTALLATION

3 When Relocating the Machine

If the machine must be moved by truck or other means of transportation, be sure to go
through the following:
1. If the machine is equipped with fax function and the move will take 2 hours or more, the
fax image data, if any, will be lost. Advise the user on this and, if necessary, print out the
image data.
2. Be sure no communication is under way with an external device.
3. Check that the contact sensor is in home position and disconnect the power cord.
4. Disconnect the interface cable and modular cable.
5. Remove the delivery tray.
6. Slide the reader unit to the left, and open the cartridge cover.
7. Take out the shipping screw that have been stored away inside the machine.
8. Take out the cartridge from inside of the machine and put it in a protective bag or the
like to avoid direct rays of the sun.
9. Close the cartridge cover and put back the reader unit.
10. Fit the shipping screw you removed in step 7 and secure the contact sensor in place.
3-14
COPYRIGHT © 2001 CANON INC.
F03-301-01
F03-301-02
2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001