Table of Contents
Advertisement
Control Panel Test (6-7: OPERATION PANEL)
This test is used to check the operation of the control panel.
A press on '7' on the keypad from the control panel selects the OPERATION PANEL Test
menu, enabling the following tests:
•
LCD Test
A press on the Start key under OPERATION PANEL test will start LCD test, in which
the screen will be filled with the character H; another press will cause the screen to turn
totally black.
•
LED Lamp Test
A press on the Start key after the LCD test selects the LED lamp test, turning all lamps
in the control panel to go ON.
•
Control Key Test
A press on the Start key after the LED lamp selects control key test 1. Press the key in-
dicated on the LCD; if it goes out, the operation is normal.
When all characters have gone out, control key test 2 (if equipped with fax functions) is
started. As in the case of operation key test 1, press the key indicated on the LCD; the op-
eration is correct if it goes out.
Key Correspondence for Control Key Test 1 (if not equipped with fax functions)
COPYRIGHT © 2001 CANON INC.
[E]
OK
[J]
[H]
[D]
[F]
[I]
F02-321-15
2000 2000 2000 2000
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 2 USING THE MACHINE
[A]
[C]
Same as LCD indications.
[G]
[B]
2-83
Advertisement
Table of Contents
Troubleshooting
