Canon SmartBase PC1200s Service Manual page 87

#1 SSSW-S26:
Bit Function
0 not used
1 not used
2 broadcast transmission confir-
mation
3 broadcast transmission prohibi-
tion
4 not used
5 not used
6 other party at time of broadcast
transmission suspension
7 error TX report at time of trans-
mission suspension
[Bit 2]
Use it to specify whether or not to indicate a confirm message to prevent the user from
making a broadcast by mistake when entering an address for a broadcast transmission.
[Bit 3]
Use it to specify whether or not to use broadcast transmission to prevent the user from
making a broadcast by mistake when entering an address for a broadcast transmission.
[Bit 6]
Use it to specify whether or not to suspend a communication to all parties when a broad-
cast transmission is suspended.
[Bit 7]
Use it to specify whether or not to generate an error TX report when a transmission is sus-
pended by pressing the Stop key.
COPYRIGHT © 2001 CANON INC.
transmission function setting
2000 2000 2000 2000
CHAPTER 2 USING THE MACHINE
1 0
- -
- -
ask do not ask
ask do not ask
- -
- -
single party all parties
do not generate generate
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
Factory setting
0
0
0
0
2-43