Original Jams (If Equipped With Adf Functions) - Canon SmartBase PC1200s Service Manual

CHAPTER 7 TROUBLESHOOTING

5.3 Original Jams (if equipped with ADF functions)

General conditions
1) Are the following rollers of the ADF rotating?
•
•
•
•
•
YES: Go through steps 2) to 6).
NO:
General conditions
2) Is the ADF closed firmly?
NO:
Original
3) Is the original placed correctly?
NO:
Stack of originals
4) Is the stack of originals in the original placement assembly more
YES: Advise the user on the number of originals that may be paled in the
Original
5) Is the original curled or do originals bond together because of static
YES: Advise the user that the cause is the originals. Remove the curl,
Roller (ADF)
6) Is the surface of the following roller of the ADF normal?
•
•
•
•
•
NO:
Gear, Belt (drive assembly)
7) Is any of the gears or the belts in the drive assembly cracked or
YES: Replace the damaged gear/belt.
7-92
COPYRIGHT © 2001 CANON INC.
original separation roller
ADF registration roller
white roller
original feed roller
original delivery roller
Go to step 7).
Close it firmly.
Place the original correctly.
than allowed?
original placement assembly.
charge?
and fan out the originals.
original separation roller
ADF registration roller
white roller
original feed roller
original delivery roller
Clean any soiled roller. If scratched, replace it.
damaged?
2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001