Connecting The Interface Cable; Connecting The Modular Cable - Canon SmartBase PC1200s Service Manual

2.7 Connecting the Interface Cable

Actions
1) Connect the cable to the USB port if a
USB cable is to be used, or to the paral-
lel port if a parallel interface cable is to
be used. Be sure also to connect the
cable to the PC.
Use interface cables that
comply with specifications
of the machine.
USB cable specifications:
5 m or shorter.
Parallel interface cable
specifications: 3 m or
shorter (Compliant to
IEEE1284, for bi-direc-
tional communication)
2.8 Connecting the Modular Cable (if equipped with fax func-
tions)
Actions
1) Connect one end of the modular cable
to the terminal [L], and the other end to
the socket of the telephone.
If both telephone and fax are to be
used, connect the modular cable from
the telephone (or answering machine)
to the [telephone] terminal.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 3 INSTALLATION
Checks/Remarks
Checks/Remarks
3-9