CHAPTER 2 USING THE MACHINE
3.11 Setting the Original Reading Functions (#6 SCANNER)
Item
1.Bit SW
2. SLICE
3. GAMMA
4. Numeric
5. LUT 1 fno
6. LUT 2 adj
7. CCD
8. MODEL
7. CCD Settings
No.
Item
0 to 18
Do not change.
19
shading position adjustment
21
left/right edge read start position adjustment
(book mode)
23
leading edge read start position adjustment
(book mode)
24
leading edge read start position
(ADF mode)
25
trailing edge read end position adjustment
(ADF mode)
26 to 33
Do not change.
34
original feed speed adjustment
(ADF mode)
*1: Make adjustments only When white lines occur. (See 3.1.12 of Chapter 7.)
The factory settings of these adjustments differ from machine to machine. For instructions
on adjustment, see 1.2.4 of Chapter 7 or 1.3.4 of Chapter 7.
2-50
COPYRIGHT © 2001 CANON INC.
Description
Do not change the setting; otherwise, the read image quality can be lost.
partially hanged
not used
*1
2000 2000 2000 2000
Unit of adjustment
-
1 unit = 0.1 mm
1 unit = 0.03 mm
1 unit = 0.1 mm
1 unit = 0.1 mm
1 unit = 0.1 mm
-
1 unit = approx. 0.5 mm
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001