Table of Contents
Advertisement
CHAPTER 2 USING THE MACHINE
#1 SSSW-SW14: inch/meter resolution setting
Bit
Function
0
paper size identification
1
paper size identification
2
inch/meter resolution conversion
scanning direction
3
not used
4
declare inch resolution
5
not used
6
not used
7
not used
[Bit 0, 1]
Use a combination of bit 0 and bit 1 to set the size of paper (default side).
•
if 0 and 0, A/B-configured paper.
•
if 0 and 1, inch-configured paper
•
if 1 and 0, A-configured paper
•
if 1 and 1, A/B-configured paper
[Bit 2]
Use it to specify whether to convert an inch resolution into a metric resolution for images
read at time of G3 transmission only in sub scanning direction or in both main and sub scan-
ning direction.
The setting made here is effective only if bit 1 of SW05 of #1 SSSW is set to '1'.
[Bit 4]
Use it to specify whether or not to declare an inch resolution to the other party at time of
G3 communication.
If set to '1', a declaration will be made using the DIS, DCS, or DTC signal to the effect
that the machine is designed to read and record images at an inch resolution.
The type of image and the direction of scanning for inch/meter resolution
conversion are determined by combinations of bits 1 and 2 of SW05 and bit
Memo
2 of SW14 of #1 SSSW as well as the type of dialing used.
2-40
COPYRIGHT © 2001 CANON INC.
1
0
1
0
1
0
main/sub scan-
sub scanning
ning
only
-
-
declare
do not declare
-
-
-
-
-
-
2000 2000 2000 2000
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
Factory setting
0
0
1
0
Advertisement
Table of Contents
Troubleshooting
