Print Test (3: Print) - Canon SmartBase PC1200s Service Manual

Hide thumbs Also See for SmartBase PC1200s:

Table of Contents

CHAPTER 2 USING THE MACHINE

3.21.5 PRINT Test (3: PRINT)

Press '3' on the keypad from the Test Mode menu to select Print Test mode. A press on '2'

or '6' on the keypad during the test will generate any of the following 2 types of test pat-

terns. Do not use the others, as they are especially designed for use by the factory and R&D.

'2' on Keypad

Press it to generate BLACK, which is a solid black print.

'6' on Keypad

Press it to generate ENDURANCE, which is a black band.

To stop test printing, press the Stop key.

Check to make sure that the print

pattern is free of contraction,

elongation, dirt, or black lines.

Check it to make sure that the

print pattern is free of white

line or uneven density.

2000 2000 2000 2000

CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001

Smartbase ir1200s