Parental Control - TP-Link TL-WR810N User Manual

Web Management Port - Web browser access normally uses the standard HTTP service

port 80. This router's default remote management Web port number is
security, you can change the remote management Web interface to a custom port by
entering that number in this box provided. Choose a number between 1024 and 65535, but
do not use the number of any common service port.
Remote Management IP Address - This is the current address you will use when

accessing your router from the Internet. The default IP Address is 0.0.0.0. It means this
function is disabled. To enable this function, change the default IP Address to another IP
Address as desired.
To access the router, you will type your router's WAN IP Address into your browser's Address (in
IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example,
if your Router's WAN address is 202.96.12.8 and you use port number 8080, enter in your
browser: http://202.96.12.8:8080. You will be asked for the router's password. After successfully
entering the password, you will be able to access the router's Web-based utility.

Note:
Be sure to change the router's default password to a very secure password.

4.12 Parental Control

Choose menu "Parental Control", and you can configure the parental control in the screen as
shown in Figure 4-53. The Parental Control function can be used to control the internet activities
of the child, limit the child to access certain websites and restrict the time of surfing.
Parental Control - Check Enable if you want this function to take effect, otherwise check

Disable.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 4-53
Parental Control Settings
- 70 -
80. For greater