Figure 144 Configuration > Spanning Tree > STP Port
The following table describes the labels in this screen.
Table 110 Configuration > Spanning Tree > STP Port
LABEL
STP Port
Edit
Port
State
External Cost
Edge Port
BPDU Filter
P2P MAC
26.2.3 The STP Port Edit Screen
Use this screen to configure the STP Port Edit settings. Click Configuration > Spanning Tree >
STP Port > Edit to open this screen.
Chapter 26 Configuration: Spanning Tree
DESCRIPTION
Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Displays the index number of the STP port.
Display the status of the STP port as enabled or disabled.
Displays the external path cost.
Displays the edge port status as Yes or No.
Displays the BPDU filter status as Yes or No.
Displays the P2P MAC status as Yes or No.
GS1900 Series User's Guide
151