The following table describes the labels in this screen.
Table 172 Configuration > Management > HTTP/HTTPS > HTTPS
LABEL
HTTPS
State
Authentication
Method
Session Timeout Enter the session timeout value. The timeout can be between 0 and 86400 minutes.
Apply
Cancel
31.6 Users
31.6.1 The Users Screen
Use this screen to configure the Users settings. Click Configuration > Management > Users to
open this screen.
Figure 206 Configuration > Management > Users
The following table describes the labels in this screen.
Table 173 Configuration > Management > Users
LABEL
Users
Add
User
Encryption
Password
Privilege Level
Action
Edit
Chapter 31 Configuration: Management
DESCRIPTION
Select the HTTPS mode operation.
Possible modes are:
•
Enabled: Enable HTTPS mode operation.
Select the authentication method from the dropdown list.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Click Add to create a new User entry.
A string identifying the user name that this entry should belong to. The allowed string
length is 1 to 32. The valid user name is a combination of letters, numbers and
underscores.
Displays the encryption status. The values can be Clear Text, Encrypted, and No
Password.
Displays the password of the user. The allowed string length is 0 to 32.
Displays the privilege level of the user, range: admin and user.
Click Edit to make changes to the entry.
GS1900 Series User's Guide
209