The following table describes the labels in this screen.
Table 159 Configuration > Management > Syslog > Remote > Add/Modify
LABEL
Remote
Server
Server Port
Severity
Facility
Apply
Cancel
31.3 SNMP
Simple Network Management Protocol (SNMP) is an application layer protocol used to manage and
monitor TCP/IP-based devices. SNMP is used to exchange management information between the
network management system (NMS) and a network element (NE). A manager station can manage
and monitor the Switch through the network via SNMP version 1 (SNMPv1), SNMP version 2c or
Table 170 Access Control Overview Console Port SSH Telnet FTP Web SNMP One session Share up to
nine sessions One session Up to five accounts No limit Chapter 42 Access Control 338 GS3700/
XGS3700 Series User's Guide SNMP version 3. The next figure illustrates an SNMP management
operation. SNMP is only available if TCP/IP is configured.
31.3.1 The Global Screen
Use this screen to view the Global settings. Click Configuration > Management > SNMP to
open this screen.
Figure 193 Configuration > Management > SNMP
The following table describes the labels in this screen.
Table 160 Configuration > Management > SNMP
LABEL
Global
State
Apply
Cancel
Chapter 31 Configuration: Management
DESCRIPTION
Enter a server IP address or domain name.
Enter a server port number.
Select the severity level of messages to be written to logs.
Select the facility from the dropdown list.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Select the global SNMP setting to be enabled or disabled.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide
199