The Mst Screen - ZyXEL Communications GS1900 Series User Manual

Figure 148 Configuration > Spanning Tree > CIST Port > Edit
The following table describes the labels in this screen.
Table 114 Configuration > Spanning Tree > CIST Port > Edit
LABEL
STP CIST Port
Port List
Priority
Internal Path
Cost (0=Auto)
Apply
Cancel

26.2.7 The MST Screen

Use this screen to view the MST settings. Click Configuration > Spanning Tree > MST to open
this screen.
Figure 149 Configuration > Spanning Tree > MST
The following table describes the labels in this screen.
Table 115 Configuration > Spanning Tree > MST
LABEL
MST Instance
Add
MSTI
VLAN List
Chapter 26 Configuration: Spanning Tree
DESCRIPTION
Enter the index number of the STP port(s).
Configure the priority for each port here.
Priority decides which port should be disabled when more than one port forms a loop in a
switch. Ports with a higher priority numeric value are disabled first. The allowed range is
between 0 and 255 and the default value is 128.
Enter the internal path cost. Enter 0 or Auto.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Click Add to create a new MST Instance entry.
Displays the Multiple Spanning Tree Instance(s) (MSTI).
Display a list of MSTI VLANs.
GS1900 Series User's Guide
155