Time; The System Time Screen - ZyXEL Communications GS1900 Series User Manual

Table 56 Configuration > System > IP > IPv6 (continued)
LABEL
IPv6 Address
Gateway
Apply
Cancel

18.3 Time

The Time option is used to setup the system time and SNTP (Simple Network Time Protocol) server
settings.

18.3.1 The System Time Screen

In the navigation panel, click Configuration > System > Time > System Time to display the
screen as shown.
Figure 90 Configuration > System > Time > System Time
The following table describes the labels in this screen.
Table 57 Configuration > System > Time
LABEL
System Time
Enable SNTP
Manual Time
Time Zone
Daylight Saving
Time
Chapter 18 Configuration: System
DESCRIPTION
Enter the IPv6 address of the Switch in the IP domain.
Enter the IPv6 address of the default outgoing gateway.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Select Enable to enable using a simple network time protocol (SNTP) server to manage the
system time or Disable to manually manage system time.
Select the system date and time values from the dropdown lists.
Select the time zone from the dropdown list.
Select Enable to use Daylight Saving Time to offset the system time or Disable not adjust
system time.
GS1900 Series User's Guide
96