The Add/Edit Profile Screen - ZyXEL Communications GS1900 Series User Manual
Gbe smart managed switch
Hide thumbs
Also See for GS1900 Series:
- User manual (272 pages) ,
- Specifications (4 pages) ,
- User manual (227 pages)
Table of Contents
Advertisement
Figure 139 Configuration > Multicast > IGMP > Profile
The following table describes the labels in this screen.
Table 105 Configuration > Multicast > IGMP > Profile
LABEL
IGMP Profile
Add
Profile
Group From
Group To
Match Action
Action
Edit
Delete
25.2.7 The Add/Edit Profile Screen
Use this screen to configure the IGMP Profile settings. Click Configuration > Multicast > IGMP
> Profile > Add/Edit to open this screen.
Figure 140 Configuration > Multicast > IGMP > Profile > Add/Edit
The following table describes the labels in this screen.
Table 106 Configuration > Multicast > IGMP > Profile > Add/Edit
LABEL
IGMP Profile
Profile
Group From
Chapter 25 Configuration: Multicast
DESCRIPTION
Click Add to create a new IGMP Profile entry.
Displays the Profile index number.
Displays the profile start group IP address.
Displays the profile end group IP address.
Displays the action of the profile as Permit or Deny.
Click Edit to make changes to the entry.
Click Delete to remove the entry.
DESCRIPTION
Enter the Profile index number.
Enter the profile start group IP address.
GS1900 Series User's Guide
146
Advertisement
Table of Contents
