The Edit Igmp Screen - ZyXEL Communications GS1900 Series User Manual

Table 101 Configuration > Multicast > IGMP > VLAN (continued)
LABEL
State
Version

25.2.3 The Edit IGMP Screen

Use this screen to configure the IGMP VLAN settings. Click Configuration > Multicast > IGMP
> VLAN > Edit to open this screen.
Figure 136 Configuration > Multicast > IGMP > VLAN > Edit
The following table describes the labels in this screen.
Table 102 Configuration > Multicast > IGMP > VLAN > Modify
LABEL
IGMP Edit
VLAN List
IGMP State
Router Ports
Auto Learn
Query
Retry
Interval (sec)
Max. Response
Interval (sec)
Chapter 25 Configuration: Multicast
DESCRIPTION
Displays the switch current VLAN querier entry as Enable or Disable.
Displays the switch current VLAN querier entry version.
DESCRIPTION
Enter the ID of a static VLAN; the valid range is between 1 and 4094.
Select the status of the VLAN to Enable or Disable the function.
Select Enabled to have the Switch learn multicast router membership information of any
VLANs automatically.
Enter the number of query retry times. The value can be between 1 and 7.
Enter the amount of time (in seconds) between general query messages sent by the router
connected to the upstream port. The value can be between 30 and 18000.
Enter the amount of time (in seconds) the router connected to the upstream port waits for
a response to an IGMP general query message.
GS1900 Series User's Guide
143