The Port Forwarding Rule Edit Screen - ZyXEL Communications AMG1202-T10A User Manual

Table 42 Network > NAT > Port Forwarding
LABEL
Service Name
Server IP Address Enter the IP address of the server for the specified service.
Add
#
Active
Service Name
Start Port
End Port
Port Translation
Start/End Port
Server IP Address This is the server's IP address.
Modify
Apply
Cancel

9.3.2 The Port Forwarding Rule Edit Screen

Use this screen to edit a port forwarding rule. Click the rule's edit icon in the Port Forwarding
screen to display the screen shown next.
Figure 67 Network > NAT > Port Forwarding: Edit
AMG1202-T10A User's Guide
DESCRIPTION
Select a service from the drop-down list box.
Click this button to add a rule to the table below.
This is the rule index number (read-only).
This field indicates whether the rule is active or not.
Clear the check box to disable the rule. Select the check box to enable it.
This is a service's name.
This is the first port number that identifies a service.
This is the last port number that identifies a service.
This is the start/end port number that the device translates.
Click the edit icon to go to the screen where you can edit the port forwarding
rule.
Click the delete icon to delete an existing port forwarding rule. Note that
subsequent address mapping rules move up by one when you take this action.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 9 Network Address Translation (NAT)
131