The Lag Add Screen - ZyXEL Communications GS1900 Series User Manual

The following table describes the labels in this screen.
Table 90 Configuration > Link Aggregation > LAG Management
LABEL
LAG Management
Add
LAG
Name
Type
Link Status
Active Member
Standby
Member
Modify
Edit
Delete

22.2.3 The LAG Add Screen

Use this screen to add a LAG. Click Configuration > Link Aggregation > LAG Management >
Add to open this screen.
Figure 125 Configuration > Link Aggregation > LAG Management > Add
Chapter 22 Configuration: Link Aggregation
DESCRIPTION
Click Add to create a new LAG Management entry.
Displays the link aggregation group (LAG), that is, one logical link containing multiple ports.
Displays the name of the link aggregation group.
This field displays how these ports were added to the trunk group. It displays:
Static - if the ports are configured as static members of a trunk group.
LACP - if the ports are configured to join a trunk group via LACP.
Displays link status as either Link up or Link down.
Displays if this member is an active member of a trunk.
Displays if this member is an standby member of a trunk.
Click Edit to make changes to the entry.
Click Delete to remove the entry.
GS1900 Series User's Guide
131