The Port Forwarding Rule Edit Screen - ZyXEL Communications P-660HN-T1H User Manual

9.3.2 The Port Forwarding Rule Edit Screen

Use this screen to edit a port forwarding rule. Click the rule's edit icon in the Port
Forwarding screen to display the screen shown next.
Figure 66 Network > NAT > Port Forwarding: Edit
The following table describes the fields in this screen.
Table 43 Network > NAT > Port Forwarding: Edit
LABEL
Rule Setup
Active
Service Name Enter a name to identify this port-forwarding rule.
Start Port
End Port
Server IP
Address
Port
Translation
Start / End
Port
Back
P-660HN-T1H User's Guide
DESCRIPTION
Click this check box to enable the rule.
Enter a port number in this field.
To forward only one port, enter the port number again in the End Port
field.
To forward a series of ports, enter the start port number here and the end
port number in the End Port field.
Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port
field above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that
begins with the port number in the Start Port field above.
Enter the inside IP address of the server here.
Enter the start port number here to which you want the device to
translate the incoming port. For a range of ports, you only need to enter
the first number of the range to which you want the incoming ports
translated, the device automatically calculates the last port of the
translated port range.
Click this to return to the previous screen without saving.
Chapter 9 Network Address Translation (NAT)
139