Ipv6 Support - ZyXEL Communications GS1900 Series User Manual

Gbe smart managed switch
Hide thumbs Also See for GS1900 Series:
Table of Contents

Advertisement

directly talk to or hear from stations that are not in the same group(s) unless such traffic first goes
through a router.
For more information on VLANs, refer to
1.1.3.1 Tag-based VLAN Example
Ports in the same VLAN group share the same frame broadcast domain, thus increasing network
performance by reducing broadcast traffic. VLAN groups can be modified at any time by adding,
moving or changing ports without any re-cabling.
Shared resources such as a server can be used by all ports in the same VLAN as the server. In the
following figure only ports that need access to the server need to be part of VLAN 1. Ports can
belong to other VLAN groups too.
Figure 3 Shared Server Using VLAN Example

1.1.4 IPv6 Support

IPv6 (Internet Protocol version 6), is designed to enhance IP address size and features. The
increase in IPv6 address size to 128 bits (from the 32-bit IPv4 address) allows up to 3.4 x 10
addresses. At the time of writing, the Switch supports the following features.
• Static address assignment and stateless auto-configuration
• Neighbor Discovery Protocol (a protocol used to discover other IPv6 devices in a network)
• Remote Management using PING, SNMP, HTTP and TFTP services
• ICMPv6 to report errors encountered in packet processing and perform diagnostic functions, such
as "PING"
• IPv4/IPv6 dual stack; the Switch can run IPv4 and IPv6 at the same time
• DHCPv6 client
Chapter 1 Getting to Know Your Switch
Chapter 9 on page
GS1900 Series User's Guide
17
62.
38
IP

Advertisement

Table of Contents
loading

Table of Contents