Table 106 Configuration > Multicast > IGMP > Profile > Add/Edit (continued)
LABEL
Group To
Match Action
Apply
Cancel
25.2.8 The Throttling Screen
Use this screen to view the Throttling settings. Click Configuration > Multicast > IGMP >
Throttling to open this screen.
Figure 141 Configuration > Multicast > IGMP > Throttling
The following table describes the labels in this screen.
Table 107 Configuration > Multicast > IGMP > Throttling
LABEL
IGMP Port Throttling
Edit
Port
Max. Groups
Exceed Group
Number Action
Filter Profile ID
25.2.9 The Add/Edit Throttling Screen
Use this screen to configure the Throttling settings. Click Configuration > Multicast > IGMP >
Throttling > Add/Edit to open this screen.
Chapter 25 Configuration: Multicast
DESCRIPTION
Enter the profile end group IP address.
Select the action of the profile as to be Permit or Deny.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Displays the port index value.
Displays the maximum number of groups.
Displays the action taken by the groups as Permit or Deny.
Displays the throttling filter profile ID.
GS1900 Series User's Guide
147